Sale
Kair 90 Degree Vertical Elbow Bend Rectangular

Kair 90 Degree Vertical Elbow Bend Rectangular

In stock
QS Code: N/A
SKU: KAIR-RECTANGULAR-BENDS-90-V

Kair 90 Degree Vertical Elbow Bend Rectangular

Clear
Ducting Size Guide View Table
QS Code: N/A
SKU: KAIR-RECTANGULAR-BENDS-90-V

    Description

    KAIR 90 DEGREE VERTICAL BEND

    This vertical 90 degree elbow bend can be used to run your ductwork around obstacles, along walls and into ceilings and offers superior performance and durability over flexible alternatives.

    Kair ducting is designed to be low profile to fit inside ceilings, floor slabs, or to be concealed above kitchen wall units. It is best utilised as a part of a ducting system for high powered cooker hood extractors and whole-house ventilation systems, such as heat recovery systems or mechanical ventilation systems in offices, houses, and apartments.

    • Made in the UK using strong high-quality white polystyrene/polypropylene material.
    • Max / Min Temperature: +60c / -15c.
    • Easy to install and durable, just push-fit duct and fittings together.
    • For permanent fixings, seal joints with silicone sealant, solvent cement or tape.
    • Kair plastic rigid duct provides superior airflow performance and durability versus flexible duct.
    • Suitable to use in compliance with Part F Building Regulations.
    • Airflow performance independently tested by BSRIA or BRE.

    Installation Tips:

    1. Kair plastic ducting pipe is lightweight & easy to install. You simply push-fit the duct pipe and fittings together. For permanent fixings, you can seal the joints with a method of your choice (Popular options include silicone sealant, solvent cement or tape).
    2. Rectangular plastic ducting can be carefully cut to the required size using a hacksaw. Offcuts are always useful to keep to hand for joining two female fittings together.
    3. If your duct run passes through a particularly cold area, we would recommend considering using our pre-insulated ducting to avoid condensation building up within your ductwork. Click here to view our range of pre-insulated plastic ducting.

    Additional information

    Weight N/A
    Dimensions N/A
    size

    , , , , , ,

    Flat System (mm) N/A
    Round System (mm) N/A
    Product Type N/A
    Product Group N/A
    Barcode N/A
    Width (mm) N/A
    Width (Kg) N/A
    Height (mm) N/A
    Length (mm) N/A
    Socket Size N/A
    Spigot Szie N/A
    Temp Max (°C) N/A
    Temp Min (°C) N/A
    Free Area N/A
    Material N/A
    Packaged Height (mm) N/A
    Packaged Length (mm) N/A
    Packaged Width (mm) N/A
    Packaged Weight (mm) N/A
    Pressure Loss (Pa) 15 l/s N/A
    Pressure Loss (Pa) 30 l/s N/A
    Pressure Loss (Pa) 60 l/s N/A
    Pressure Loss (Pa) 120 l/s N/A
    Pressure Loss (Pa) 180 l/s N/A
    Airflow Performance (l/s) Low N/A
    Airflow Performance (l/s) Med N/A
    Airflow Performance (l/s) High N/A
    Airflow Performance (m³/h) Low N/A
    Airflow Performance (m³/h) Med N/A
    Airflow Performance (m³/h) High N/A
    Decibel Rating DB Min N/A
    Decibel Rating DB Max N/A
    Diameter Inner (mm) N/A
    Diameter Outer (mm) N/A
    Diameter (mm) N/A
    Equivalent Area (mm) N/A
    Fan Opration Modes N/A
    Free Area CM Min N/A
    Free Area CM Max N/A
    Selv N/A
    Timer N/A
    Pullcord N/A
    Maximum Suggested Long Duct Run N/A
    Humidistat N/A
    Power Min Watts N/A
    Power Max (Watts) N/A
    Thickness N/A
    Volate (V) N/A

    Brand

    Kair

    17 reviews for Kair 90 Degree Vertical Elbow Bend Rectangular

    1. 5 out of 5

      Leslie Davison

      Reasonable fit, but would have been even better if more rigid. Pretty good all the same!

    2. 4 out of 5

      Terry Mosley

      no issues good

    3. 5 out of 5

      Zulfiqar Ali

      Very satisfied

    4. 5 out of 5

      Anthony Beaumont

      Couldnt have done the job without them, excellent value for money.

    5. 5 out of 5

      Mark Thomason

      just the job

    6. 5 out of 5

      Kuldip Chexal

      All parts of the 125 set up worked very well. Very satisfied.

    7. 4 out of 5

      Peter Dinning

      Its ducting. What more can you say!

    8. 5 out of 5

      Peter Miles

      Part of a projest – did athe job and great delivery too!

    9. 4 out of 5

      HUGH RICHMOND

      tight bend ideal fit

    10. 5 out of 5

      Chris Halliday

      The right type of bend for f1 corners

    11. 5 out of 5

      Robert Walder

      good product and a good service

    12. 5 out of 5

      Clive Parsons

      The product I brought was great and did the job.

    13. 5 out of 5

      kinga duda

      fast delivery, item as described, thank you

    14. 5 out of 5

      Mrs Morgan

      Excellent service and fast delivery. One of the best online companies I have used. No hesitation in recommending this company.

    15. 5 out of 5

      John Worthington

      Good product and service. Like other reviwer this was only site where product could be found.

    16. 5 out of 5

      Brian Nightingale

      This site is the ony one I found these on. Simple to order and delivered in acouple of days.

    17. 5 out of 5

      Kath Sailes

      Very helpful company. We altered on line order day after submitted and they accepted the change and processed order very speedily. Many thanks. We will certainly recommend you.


    Add a review

    Product has no documents.