Kair Ceiling Extract Valve White Coated Metal Vent

Kair Ceiling Extract Valve White Coated Metal Vent

In stock
QS Code: N/A

Kair Ceiling Extract Valve White Coated Metal Vent

Ducting Size Guide View Table
QS Code: N/A



    High-quality white powder-coated metal adjustable ceiling air extract vent. The airflow is adjusted by rotating the control disc. Male spigot will fit inside Round Pipe or Flexible Hose.

    • Aesthetically pleasing wipe-clean design suitable for internal use.
    • Suitable for internal use in compliance with Part F Building Regulations.
    • Designed to extract air. If you are looking to supply air we recommend using a supply valve.
    • The airflow is adjusted by rotating the control disc and locking with a lock nut when set.
    • Mounting ring manufactured in 0.6mm thick galvanised steel with four 3mm fixing holes.
    • The valve body is supplied with a cellular plastic gasket to form an air-tight seal.

    Additional information

    Weight N/A
    Dimensions N/A

    , , ,

    Flat System (mm) N/A
    Round System (mm) N/A
    Product Type N/A
    Product Group N/A
    Barcode N/A
    Width (mm) N/A
    Width (Kg) N/A
    Height (mm) N/A
    Length (mm) N/A
    Socket Size N/A
    Spigot Szie N/A
    Temp Max (°C) N/A
    Temp Min (°C) N/A
    Free Area N/A
    Material N/A
    Packaged Height (mm) N/A
    Packaged Length (mm) N/A
    Packaged Width (mm) N/A
    Packaged Weight (mm) N/A
    Pressure Loss (Pa) 15 l/s N/A
    Pressure Loss (Pa) 30 l/s N/A
    Pressure Loss (Pa) 60 l/s N/A
    Pressure Loss (Pa) 120 l/s N/A
    Pressure Loss (Pa) 180 l/s N/A
    Airflow Performance (l/s) Low N/A
    Airflow Performance (l/s) Med N/A
    Airflow Performance (l/s) High N/A
    Airflow Performance (m³/h) Low N/A
    Airflow Performance (m³/h) Med N/A
    Airflow Performance (m³/h) High N/A
    Decibel Rating DB Min N/A
    Decibel Rating DB Max N/A
    Diameter Inner (mm) N/A
    Diameter Outer (mm) N/A
    Diameter (mm) N/A
    Equivalent Area (mm) N/A
    Fan Opration Modes N/A
    Free Area CM Min N/A
    Free Area CM Max N/A
    Selv N/A
    Timer N/A
    Pullcord N/A
    Maximum Suggested Long Duct Run N/A
    Humidistat N/A
    Power Min Watts N/A
    Power Max (Watts) N/A
    Thickness N/A
    Volate (V) N/A



    21 reviews for Kair Ceiling Extract Valve White Coated Metal Vent

    1. 3 out of 5

      Howard Greenslade

      not very good. not enough vent for a good air flow

    2. 4 out of 5

      Vytautas Grinevicius


    3. 5 out of 5

      Jayesh Mistry

      Good quality, metal vent which is adjustable. Looks top dollar

    4. 4 out of 5

      Gary Thomas

      Good quality product. Looks good. However the on site instructions are misleading. It states that ducting should be pulled through the ceiling cut out and attached to the aluminium insert before fixing it to the ceiling. How is this possible as the duct plus the clamp will be much bigger than the 10cm cut out? I had to attach the duct from the loft. No fixing screws were provided in my delivery and those required are exceptionally small necessitating an extra visit to the local hardware shop. I think that sealant is necessary around the aluminium insert to achieve the best fitting. The lip on the fixing could also be bigger and the screw holes slightly bigger in my opinion. Once the aluminium insert is in place the white cover fits easily.

    5. 4 out of 5

      Cyril Burnett

      Just the right job. very good service would recommend to anyone.

    6. 4 out of 5

      Thomas Black

      Good quality and easily fitted. The screw holes of inner section are small and positioned close to 100mm hole cut through the ceiling, so it may be problematic to fit if you cant screw directly into the ceiling board.

    7. 3 out of 5

      Stephen Russell

      The ventilation terminal was of very good quality which Im happy with ,the only trouble is it arrived dented so I had to either send it back and put off the job or bend it back, I did the later and managed to get it looking round. I was quite surprised it was bent as it is thick gauge steel and I was also surprised it arrived in a Jiffy bag?

    8. 5 out of 5

      Donal Dunne

      Great product, delivered on time. Very happy

    9. 5 out of 5

      Jane Fitzpatrick

      Product is good and the service was excellent

    10. 5 out of 5

      Robin Fisher

      Neat, good looking and easy to install. The ability to adjust the air intake opening a good feature.

    11. 5 out of 5

      Paul Bainbridge

      A high quality product with easy adjustment, easy to install and looks good. I was worried it might look too industrial but looks great in a domestic environment.

    12. 5 out of 5

      Ed Vergalen

      very good, thank you

    13. 5 out of 5

      Louis Hall

      Havent installed the item yet, but arrived very quickly, intact and appears to be exactly what I ordered. Will solve my problem of satisfying regs when penetrating into a lowered ceiling with steels in cavity requiring 1 hr protection

    14. 5 out of 5

      Christopher Bean

      Simple but effective design and very easy to fit.

    15. 5 out of 5

      William Johnston

      Well made and fairly priced,would use again.

    16. 5 out of 5

      Alison Brown

      Better quality than I expected, really neat and strong and looks very unobtrusive in the ceiling/ Great value for money.

    17. 5 out of 5

      Billy Dean

      Excellent quality looks very smart in situ. Highly recommend. Easy to fit and ajust.

    18. 4 out of 5

      David Iszchak

      Nice finish. Pleased the cover can be removed for cleaning

    19. 5 out of 5

      Ian Hammond

      Good product, as described. Very good price.

    20. 5 out of 5

      Ian Hammond

      As described, good price fast delivery. All good.

    21. 5 out of 5

      anthony heath

      ideal for use in the bathroom much better than the existing vent

    Add a review

    • DUCMW104 White Extract Valve Kair Data Sheet