Rytons Floor Vent Set Brass

Rytons Floor Vent Set Brass

In stock
QS Code: N/A

Rytons Floor Vent Set Brass

Ducting Size Guide View Table
QS Code: N/A


    Rytons Floor Ventilator with louvre

    • Room ventilator utilising air from a ventilated sub-floor void.
    • Mirror polished solid brass louvre grille provides a stylish appearance.
    • Inverted louvres give a flush finish.
    • Brass coloured screws included.
    • BBA approved – your independent assurance that the product meets building regulations and standards and will last.

    Free Area

    11000mm² (110cm²) per set.


    267mm L x 95mm H x 125mm D.

    See our image gallery above for a dimensional drawing. AutoCAD drawing available by email.


    1. Cut an opening in the floor and insert sleeve (sleeve can be trimmed with a fine-tooth saw to reduce the depth if required).
    2. Fasten louvre through pre-formed holes in the flange around the sleeve using screws provided.
    3. Peel off the protective film.
    4. Note: When installing in an uncarpeted floor the flange may be trimmed back slightly and the louvre ventilator screwed into the floor to maintain as flush a finish as possible.
    5. Important: In areas where radon gas has been identified as a problem, ventilation shall not be taken from the space below ground floor level (e.g. using a floor vent), or interfere in any way with any remedial measures already in place to prevent radon gas entering the habitable part of the dwelling.

    UK Regulations and Standards

    The Building Regulations, Approved Document J.
    The Building (Scotland) Regulations, Mandatory Standard 3.21.
    The Building Regulations (Northern Ireland),
    Technical Booklet L. British Standard BS 5440-2:2009.
    For venting, decorative fuel effect gas fires refer to British Standard BS 5871-3:2005.

    Handling Information

    Box quantity: 1 set.
    Box size: 28cm W x 11cm H x 14.5cm D.
    Box weight: 0.39kg.

    Additional information

    Dimensions N/A


    Flat System (mm) N/A
    Round System (mm) N/A
    Product Type N/A
    Product Group N/A
    Barcode N/A
    Width (mm) N/A
    Width (Kg) N/A
    Height (mm) N/A
    Length (mm) N/A
    Socket Size N/A
    Spigot Szie N/A
    Temp Max (°C) N/A
    Temp Min (°C) N/A
    Free Area N/A
    Material N/A
    Packaged Height (mm) N/A
    Packaged Length (mm) N/A
    Packaged Width (mm) N/A
    Packaged Weight (mm) N/A
    Pressure Loss (Pa) 15 l/s N/A
    Pressure Loss (Pa) 30 l/s N/A
    Pressure Loss (Pa) 60 l/s N/A
    Pressure Loss (Pa) 120 l/s N/A
    Pressure Loss (Pa) 180 l/s N/A
    Airflow Performance (l/s) Low N/A
    Airflow Performance (l/s) Med N/A
    Airflow Performance (l/s) High N/A
    Airflow Performance (m³/h) Low N/A
    Airflow Performance (m³/h) Med N/A
    Airflow Performance (m³/h) High N/A
    Decibel Rating DB Min N/A
    Decibel Rating DB Max N/A
    Diameter Inner (mm) N/A
    Diameter Outer (mm) N/A
    Diameter (mm) N/A
    Equivalent Area (mm) N/A
    Fan Opration Modes N/A
    Free Area CM Min N/A
    Free Area CM Max N/A
    Selv N/A
    Timer N/A
    Pullcord N/A
    Maximum Suggested Long Duct Run N/A
    Humidistat N/A
    Power Min Watts N/A
    Power Max (Watts) N/A
    Thickness N/A
    Volate (V) N/A


    Rytons Building Products Ltd


    There are no reviews yet.

    Be the first to review “Rytons Floor Vent Set Brass”

    • BBA Certificate 11/4866: Product Sheet 4 - Rytons Ventilator