Vent Axia HR Single Room Ducted Heat Recovery Unit

Vent Axia HR Single Room Ducted Heat Recovery Unit

In stock
QS Code: N/A

Vent Axia HR Single Room Ducted Heat Recovery Unit

Ducting Size Guide View Table
QS Code: N/A


    The Windsor HR100-RS is a single room heat recovery unit that is designed for a continuous operation providing up to 70% Heat Recovery.

    • Up to 70 M3/h Continuous Airflow Rate.
    • 3 Year Warranty.
    • Eliminates mould and controls condensation.
    • Low Noise! Only 20 dB(A) on tickle setting

    The units are ideal for single bedroom/bathroom applications such as hotel rooms, nursing homes and residential care homes.

    The Top Access features top access and is ideal for loft installations.

    The Bottom Access features bottom access and is ideal for installation on the ceiling slab above a suspended ceiling.

    The unit comes fitted with a single 2-speed motor and provides continuous low volume ventilation with a boost option. A variety of control devices are available for manual or automatic speed control.

    An integral heat exchanger transfers heat from the outgoing stale air to the fresh air supply, raising the supply air temperature whilst at the same time reducing its relative humidity.

    Up to 70m³/h FID capacity (extract airflow).


    The HR100HR is compatible with 100mm diameter flexible ducting which fits onto the unit via the metal spigots and can be fastened using tape or worm drive clips.

    A 22mm diameter condensate drain connection is situated on the base of the unit, this should be connected to a suitable outlet for condensate drainage.

    Typical Specifications

    Performance: m³/h l/s
    Max ventilation rate 66 18.3
    N° speed settings 2

    Efficiency: The unit should retain up to 70% of the temperature differential of outgoing air.

    Heat exchanger: should be of a multi-plate cross-flow type constructed out of a polymeric plastic with ultrasonically welded joints.

    Motor: Should be a 2 speed 240V 50Hz A/C with sleeve bearings, greased for life. It shall operate up to an ambient temperature of 40°C and be fitted with a one-shot thermal overload protective device.

    Fan: The two polymeric fan wheels should be a centrifugal forward curve type on a common shaft.

    Controls: The unit should be operated via a remote Trickle Boost switch or a humidistat. A light switch can be used providing a ‘timed out’ device is employed.

    Ducting spigots: The unit should provide 100mm Ø x 50mm spigots for all duct connections. The unit cannot be handed. (Can be converted to flat ducting).

    Filter: not fitted.

    Condensation: the outlet provided should be 22mm Ø located on the underside of the unit.

    Construction: the unit outer case is manufactured from white powder-coated sheet metal.

    Sound Levels: dB(A) @ 3m
    Minimum 20.0
    Maximum 30.0

    Mains electrical supply: 230VAC 50Hz.

    Complies to the following approvals/directives: CE

    Additional information

    Weight N/A
    Dimensions N/A

    , ,

    Flat System (mm) N/A
    Round System (mm) N/A
    Product Type N/A
    Product Group N/A
    Barcode N/A
    Width (mm) N/A
    Width (Kg) N/A
    Height (mm) N/A
    Length (mm) N/A
    Socket Size N/A
    Spigot Szie N/A
    Temp Max (°C) N/A
    Temp Min (°C) N/A
    Free Area N/A
    Material N/A
    Packaged Height (mm) N/A
    Packaged Length (mm) N/A
    Packaged Width (mm) N/A
    Packaged Weight (mm) N/A
    Pressure Loss (Pa) 15 l/s N/A
    Pressure Loss (Pa) 30 l/s N/A
    Pressure Loss (Pa) 60 l/s N/A
    Pressure Loss (Pa) 120 l/s N/A
    Pressure Loss (Pa) 180 l/s N/A
    Airflow Performance (l/s) Low N/A
    Airflow Performance (l/s) Med N/A
    Airflow Performance (l/s) High N/A
    Airflow Performance (m³/h) Low N/A
    Airflow Performance (m³/h) Med N/A
    Airflow Performance (m³/h) High N/A
    Decibel Rating DB Min N/A
    Decibel Rating DB Max N/A
    Diameter Inner (mm) N/A
    Diameter Outer (mm) N/A
    Diameter (mm) N/A
    Equivalent Area (mm) N/A
    Fan Opration Modes N/A
    Free Area CM Min N/A
    Free Area CM Max N/A
    Selv N/A
    Timer N/A
    Pullcord N/A
    Maximum Suggested Long Duct Run N/A
    Humidistat N/A
    Power Min Watts N/A
    Power Max (Watts) N/A
    Thickness N/A
    Volate (V) N/A




    There are no reviews yet.

    Be the first to review “Vent Axia HR Single Room Ducted Heat Recovery Unit”

    • Vent Axia HR100RS datasheet