Sale
Vent Axia Lo-carbon Tempra Single Room Heat Recovery Unit

Vent Axia Lo-carbon Tempra Single Room Heat Recovery Unit

In stock
QS Code: N/A
SKU: VA-LO-CARBON-TEMPRA

Vent Axia Lo-carbon Tempra Single Room Heat Recovery Unit

Clear
Ducting Size Guide View Table
QS Code: N/A
SKU: VA-LO-CARBON-TEMPRA

    Description

    Vent Axia Heat Recovery Unit Single Room Lo-Carbon Tempra

    The Vent-Axia Lo-Carbon Tempra through the wall heat recovery units is suitable for fitting through a 102mm (4”) circular hole and are designed for use in bathrooms, toilets and utility areas. Under the new Building Regulations Document F continuous running products, such as the Lo-Carbon Tempra only need to move the amount of air as laid down in table 5.1a of Document F. The Vent-Axia Lo-Carbon Tempra is available with pullcord control, timer control or humidistat, timer and pull cord. All models are also available in SELV (Safety Extra Low Voltage).

    Typical Installation: The Lo-Carbon Tempra unit is designed for installation in a 102mm (4”) core drilled hole. All installation can be carried out from inside the building. The units are suitable for external walls up to 318mm thick.

    Range Product Specification

    Complies with Building Regulations Part L 2010:
    Low energy consumption means the Tempra exceeds the energy-saving requirements in Part L, Conservation of Fuel and Power.

    Versatile control:
    Switching on/off or from a trickle to boost speeds is possible in several ways: Switched Live, Pullcord or Humidistat. Overrun and delay start timers are also available.

    Summer Setting:
    The extract-only Summer Setting helps keep you cool by closing off the intake from outside, reducing the amount of warm air entering the dwelling.

    Fits 100mm diameter hole:
    The Tempra will fit 100mm through the wall applications as a straight replacement for a traditional extract fan.

    Continuous or intermittent flow rates:
    Air flows can be set to quiet, low-speed continuous rates or high-speed intermittent boost rates.

    Low energy consumption, low noise:
    The unique twin impeller design consumes as little as 2.0 Watts and operates almost silently on trickle setting.

    Long Life ECDC Motor:
    The units are fitted with a 24V ECDC motor with a state of the art built-in power supply. This has the ability to operate at only 2 Watts power consumption on normal setting, offering a 90% energy saving over conventional AC equivalents

    Maintenance:
    Apart from removing odours, providing fresh air and recovering heat, this appliance extracts airborne impurities such as dust, dirt and grease. These gradually build up and detract from the efficiency and appearance of the appliance. To ensure peak performance, the heat exchanger should be cleaned as required in accordance with the instructions supplied.

    Typical Installation:
    The Lo-Carbon Tempra unit is designed for installation in a 102mm (4”) core drilled hole. All installation can be carried out from inside the building. The units are suitable for external walls up to 318mm thick.

    Easy installation and maintenance

    With simple construction, Tempra is both easy to fit in the same location as an existing 100mm diameter fan, and with easy access to the heat exchanger for maintenance.

    Additional information

    Dimensions N/A
    option

    , , , , , , , ,

    Flat System (mm) N/A
    Round System (mm) N/A
    Product Type N/A
    Product Group N/A
    Barcode N/A
    Width (mm) N/A
    Width (Kg) N/A
    Height (mm) N/A
    Length (mm) N/A
    Socket Size N/A
    Spigot Szie N/A
    Temp Max (°C) N/A
    Temp Min (°C) N/A
    Free Area N/A
    Material N/A
    Packaged Height (mm) N/A
    Packaged Length (mm) N/A
    Packaged Width (mm) N/A
    Packaged Weight (mm) N/A
    Pressure Loss (Pa) 15 l/s N/A
    Pressure Loss (Pa) 30 l/s N/A
    Pressure Loss (Pa) 60 l/s N/A
    Pressure Loss (Pa) 120 l/s N/A
    Pressure Loss (Pa) 180 l/s N/A
    Airflow Performance (l/s) Low N/A
    Airflow Performance (l/s) Med N/A
    Airflow Performance (l/s) High N/A
    Airflow Performance (m³/h) Low N/A
    Airflow Performance (m³/h) Med N/A
    Airflow Performance (m³/h) High N/A
    Decibel Rating DB Min N/A
    Decibel Rating DB Max N/A
    Diameter Inner (mm) N/A
    Diameter Outer (mm) N/A
    Diameter (mm) N/A
    Equivalent Area (mm) N/A
    Fan Opration Modes N/A
    Free Area CM Min N/A
    Free Area CM Max N/A
    Selv N/A
    Timer N/A
    Pullcord N/A
    Maximum Suggested Long Duct Run N/A
    Humidistat N/A
    Power Min Watts N/A
    Power Max (Watts) N/A
    Thickness N/A
    Volate (V) N/A

    Brand

    Vent-Axia

    5 reviews for Vent Axia Lo-carbon Tempra Single Room Heat Recovery Unit

    1. 4 out of 5

      Stephen Renow

      Great price, delivered fast and not too hard to fit – be sure to fit a 100mm pipe for it to slide through – this makes installation much easier. Full power is quite loud but the standard low power is acceptable. Not sure you would sleep that easily with it running – hence the four stars, I had hoped it would be quieter. On a cold day the incoming air is noticeably warmer than the outside air temperature.

    2. 5 out of 5

      Richard Chapman

      Does exactly what it says on the tin. Little noisier than i expected but does the job.Many thanks i-sells.

    3. 5 out of 5

      TOMAS Kuzmicius

      Best price online, good item,parcel has been damaged,lucky just box.

    4. 4 out of 5

      Tina Macabhuinn

      This is an easy to fit unit which has clear picture instructions and fitted in the hole my old fan was in with a small adjustment. The bathroom was cold and damp and is now warm and dry. The trickle fan is maybe not the quietest but not noticeable in the general background sounds. The boost is noiser but still quieter than my old extractor. I would recommend it. The only irritation in the whole process was the courier used by i-sells which believes in surcharging those in the north of Scotland a ridiculous amount for delivery. Ironically the free delivery area included a far more remote location where I happen to work just because the letters on the postcode were different. Ludicrous.

    5. 3 out of 5

      Simon Greatrex

      Fan is clearly audible at low speed & is quite noisy at boost – Im glad I have a manual pull cord to keep it at low speed unless the shower is/has just been on. I wouldnt put this in an en-suite because it might still be audible at low speed even with the door shut. It does keep steam levels down when showering and on boost speed. Note that even with the heat recovery – the incoming air feels cold – Ive yet to take actual temperature readings though.


    Add a review

    • Lo-Carbon Tempra Datasheet
    • Installation Instructions for SELV Tempra Models