Sale
Vent Axia Multivent MEV Unit

Vent Axia Multivent MEV Unit

In stock
QS Code: N/A
SKU: VENT-AXIA-MV

Vent Axia Multivent MEV Unit

Clear
Ducting Size Guide View Table
QS Code: N/A
SKU: VENT-AXIA-MV

    Description

    MV250 Boxed Multivent – VENT AXIA 181510

    The Multivent continuous mechanical extract ventilation range is designed for the simultaneous ventilation of separate areas in the home or as a multi-point extractor system for a wide range of commercial applications.

    In the home, the system is usually located in the loft or airing cupboard with ducts taken to the bathroom, kitchen and utility room to remove water vapour at source and from WC’s to remove odours. Designed to provide 0.7 of an air change based on the volume of the building, the Multivent system provides adequate ventilation, even in a ‘tight’ dwelling. Pollutant concentrations and humidity can be controlled.

    The Multivent H versions are now available with 2 control options. An integral humidity sensor that will detect any rise in humidity within the system and will boost between any 2 of the 3 speeds. A new Wire-less Controller is available for use with the Multivent H with 3-speed options offering total control of the systems.

    Multivent MV250 and MV350 are guaranteed for 2 years with an extended motor guarantee to 5 years offered on the MVDC LoWatt Energy Saving model.

    • Fan: The impeller should be a centrifugal backward curved type, dynamically balanced mounted directly onto the motor.
    • Motor: The AC version should be a capacitor run external rotor motor capable of 3 fixed speeds. 240V 50Hz A/C with ball race bearings, greased for life. It shall operate up to an ambient temperature of 40°C and be fitted with a one-shot thermal overload protective device.
    • Ducting spigots: Ducting spigots: The unit should have 4-N° 100/125mm Ø extract points and 1x125mm outlet to atmosphere. (Can be converted to flat ducting).
    • Filter: not fitted.
    • Condensation: Two 15mm condensate drain outlets on the side of the unit at both the top and the bottom for different mounting positions.
    • Construction: The unit should be moulded in ABS plastic.
    • Sound Levels: Refer to the above table for maximum performance.
    • Mains electrical supply: 230VAC 50Hz.
    • Complies to the following approvals/directives: LVD, EMC, BEAB and CE.
    • £25 to run per annum depending on the energy provider

     

    FID |————- dB(A) @ 3m ————-|
    Performance m³/h Casing Breakout Duct Inlet 100mm Ø Duct Inlet 125mm Ø
    MV250

    low

    medium

    high

    161

    305

    443

    22.4

    31.0

    35.4

    27.9

    42.9

    48.6

    27.8

    43.2

    48.0

    MV250H

    low

    medium

    high

    175

    344

    443

    22.4

    31.0

    35.4

    27.9

    42.9

    48.6

    27.8

    43.2

    48.0

    Additional information

    Weight N/A
    option

    ,

    Flat System (mm) N/A
    Round System (mm) N/A
    Product Type N/A
    Product Group N/A
    Barcode N/A
    Width (mm) N/A
    Width (Kg) N/A
    Height (mm) N/A
    Length (mm) N/A
    Socket Size N/A
    Spigot Szie N/A
    Temp Max (°C) N/A
    Temp Min (°C) N/A
    Free Area N/A
    Material N/A
    Packaged Height (mm) N/A
    Packaged Length (mm) N/A
    Packaged Width (mm) N/A
    Packaged Weight (mm) N/A
    Pressure Loss (Pa) 15 l/s N/A
    Pressure Loss (Pa) 30 l/s N/A
    Pressure Loss (Pa) 60 l/s N/A
    Pressure Loss (Pa) 120 l/s N/A
    Pressure Loss (Pa) 180 l/s N/A
    Airflow Performance (l/s) Low N/A
    Airflow Performance (l/s) Med N/A
    Airflow Performance (l/s) High N/A
    Airflow Performance (m³/h) Low N/A
    Airflow Performance (m³/h) Med N/A
    Airflow Performance (m³/h) High N/A
    Decibel Rating DB Min N/A
    Decibel Rating DB Max N/A
    Diameter Inner (mm) N/A
    Diameter Outer (mm) N/A
    Diameter (mm) N/A
    Equivalent Area (mm) N/A
    Fan Opration Modes N/A
    Free Area CM Min N/A
    Free Area CM Max N/A
    Selv N/A
    Timer N/A
    Pullcord N/A
    Maximum Suggested Long Duct Run N/A
    Humidistat N/A
    Power Min Watts N/A
    Power Max (Watts) N/A
    Thickness N/A
    Volate (V) N/A

    Brand

    Vent-Axia

    Reviews

    There are no reviews yet.


    Be the first to review “Vent Axia Multivent MEV Unit”

    • Vent-Axia MV250H