Vent Axia T-Series In-Line Fan

Vent Axia T-Series In-Line Fan

In stock
QS Code: N/A

Vent Axia T-Series In-Line Fan

Ducting Size Guide View Table
QS Code: N/A


    T-Series In-Line models are reversible, offer low sound levels, speed control and build in electronic shutter

    No other range of high performance in-line duct fan offers a combination of 3 impeller diameters, reversibility, low sound level, speed control and built-in electric shutter. T-Series features a unique speed control pack which enables high, medium or low speed to be preset to suit room size or required duty. Designed for use with rigid or flexible ducting, T-Series In-Line models can be plate mounted or fixed through partitions and in ceiling voids. T-Series built right, built tight, built bright.

    T-Series controllers may be used with this model to obtain a choice of speeds, extract/intake airflow direction and automatic sensor operation. The Vent-Axia Ecotronic controller gives even greater running economy with its minimum speed setting and ‘E’ mode.


    Where ducts pass through an unheated roof void, the duct should be insulated. Horizontal ducts should fall away from the fan unit. In circumstances where an excessive amount of moisture is present, a condensation trap should be installed in the exhaust duct. The fan unit should be accessible for regular maintenance.

    Easy Cleaning

    Integrated component design allows all parts to be dismantled for cleaning without the use of specialist tools.


    Supplied complete with an integral instantaneous automatic louvre shutter. It will operate on both intake and extract and at any angle of mounting.

    The shutter is electronically controlled by an actuator with a damped action giving quiet operation during instant opening and closing. The interlocking edges of the shutter blades provide maximum backdraught protection.

    When the ventilating unit is used with a T-Series controller, the shutter can be set open with the fan motor switched Off to provide natural ventilation without the security risk of an open window.


    Motor purpose-designed. Suitable for running at any angle. Quiet running, enclosed.


    Suitable for operation in ambient temperatures from -40°C to +50°C.

    Fitted with non-self resetting Thermal Overload Protection.

    Supply voltage 220-240V/1/50 Hz.

    Additional information


    , ,

    Flat System (mm) N/A
    Round System (mm) N/A
    Product Type N/A
    Product Group N/A
    Barcode N/A
    Width (mm) N/A
    Width (Kg) N/A
    Height (mm) N/A
    Length (mm) N/A
    Socket Size N/A
    Spigot Szie N/A
    Temp Max (°C) N/A
    Temp Min (°C) N/A
    Free Area N/A
    Material N/A
    Packaged Height (mm) N/A
    Packaged Length (mm) N/A
    Packaged Width (mm) N/A
    Packaged Weight (mm) N/A
    Pressure Loss (Pa) 15 l/s N/A
    Pressure Loss (Pa) 30 l/s N/A
    Pressure Loss (Pa) 60 l/s N/A
    Pressure Loss (Pa) 120 l/s N/A
    Pressure Loss (Pa) 180 l/s N/A
    Airflow Performance (l/s) Low N/A
    Airflow Performance (l/s) Med N/A
    Airflow Performance (l/s) High N/A
    Airflow Performance (m³/h) Low N/A
    Airflow Performance (m³/h) Med N/A
    Airflow Performance (m³/h) High N/A
    Decibel Rating DB Min N/A
    Decibel Rating DB Max N/A
    Diameter Inner (mm) N/A
    Diameter Outer (mm) N/A
    Diameter (mm) N/A
    Equivalent Area (mm) N/A
    Fan Opration Modes N/A
    Free Area CM Min N/A
    Free Area CM Max N/A
    Selv N/A
    Timer N/A
    Pullcord N/A
    Maximum Suggested Long Duct Run N/A
    Humidistat N/A
    Power Min Watts N/A
    Power Max (Watts) N/A
    Thickness N/A
    Volate (V) N/A




    There are no reviews yet.

    Be the first to review “Vent Axia T-Series In-Line Fan”

    • Supplementary Instructions
    • F&W Instructions
    • Catalogue Page
    • Wiring Diagrams